For screen reader problems with this website, please call217.793.88882 1 7 7 9 3 8 8 8 8Standard carrier rates apply to texts.

Box Store Prices, Local Service
Sundown One

Sundown One

217.793.8888

Chief® Manufacturing Power Filtering & Surge Protection Wall Outlet

Model #: EGX-SF2

$204.00

At a Glance

A high-performance, dual gang housing, isolated ground, dual receptacle outlet featuring non-sacrificial multi-stage filtration and surge protection system. Protects equipment from disruptive high frequency noise and damage caused by power disturbances.

WarningProposition 65 Warning for California Residents
Chief® Manufacturing Power Filtering & Surge Protection Wall Outlet

General Specs

Depth (in.)3.79
Width (in.)4.33
Height (in.)3.95
Number Of Outlets2

General

AdjustmentsFor additional dimensional specifications, see technical drawing.
CertificationsUL Listed
NotesHousing Dimensions (HxWxD): 3.95 x 4.33 x 3.79” (100 x 110 x 96 mm)
Overall Dimensions (H x W x D)4.5 x 5.25 x 4.04” (114 x 133 x 103 mm)
Power RequirementsPower Consumption: <0.5 watt; Type 3 Surge Protective Device (SPD); Voltage Protection Rating (VPR): 600V L-N, N-G; 800V L-G ; Maximum Continuous Operating Voltage (MCOV): 240V; Nominal Discharge Current (In): 3kA; Short Circuit Current Rating (SCCR): 5kA; Ambient Temperature Max: 40 degrees C
Primary Amperage15A, 1875 W continuous
Solution TypeUniversal

Chief® Manufacturing Power Filtering & Surge Protection Wall Outlet

Model #: EGX-SF2
99041
Model #: EGX-SF2
Chief
$204.00

$204.00

At a Glance

A high-performance, dual gang housing, isolated ground, dual receptacle outlet featuring non-sacrificial multi-stage filtration and surge protection system. Protects equipment from disruptive high frequency noise and damage caused by power disturbances.

Get to know this product.

Non-volatile spike protection with LED power indicator

Non-sacrificial multi-stage technology

Non-current limiting design passes full power on a regular circuit; redundant protection circuits

Improves the reliability and functionality of connected equipment by safeguarding equipment from high energy transients, lightning strikes and electronic noise events that can cause gear degradation and downtime

Line filter reduces common and differential mode noise by up to 40 dB

Rated for 125V~, 60Hz, 15 A

1875 watt maximum

Ferrite toroid based EMI Filter

Withstand rating of 240 VAC continuous without damage or loss of protection

Useful Documents
Specifications

General Specs

Depth (in.)3.79
Width (in.)4.33
Height (in.)3.95
Number Of Outlets2

General

AdjustmentsFor additional dimensional specifications, see technical drawing.
CertificationsUL Listed
NotesHousing Dimensions (HxWxD): 3.95 x 4.33 x 3.79” (100 x 110 x 96 mm)
Overall Dimensions (H x W x D)4.5 x 5.25 x 4.04” (114 x 133 x 103 mm)
Power RequirementsPower Consumption: <0.5 watt; Type 3 Surge Protective Device (SPD); Voltage Protection Rating (VPR): 600V L-N, N-G; 800V L-G ; Maximum Continuous Operating Voltage (MCOV): 240V; Nominal Discharge Current (In): 3kA; Short Circuit Current Rating (SCCR): 5kA; Ambient Temperature Max: 40 degrees C
Primary Amperage15A, 1875 W continuous
Solution TypeUniversal
WarningProposition 65 Warning for California Residents